Ready
1. A blade. Ordinary utility knives are fine, but be careful not to use the handle. Razor blades may have to be used on special occasions.
2. Be careful. To do this kind of work is actually very simple, but the most important thing is that you must be careful to succeed.
3. A hair dryer. This is the most important tool and the core tool in the whole set of methods, but please note that the hair dryer we use is for heating, so we must be able to blow hotter air. Ordinary hair dryers may not work, the more old-fashioned ones The better.
How to remove different materials
1. Self-adhesive tape on the smooth paper packing box.
Scrape the beginning with a razor blade and slowly tear it off with your hands. If the speed is too slow, use a hair dryer to heat it slightly.
2. Self-adhesive tape on the natural pulp paper packaging box.
Use a computer to blow and heat it up to a weak windshield. Use a blade to scrape the beginning. Focus on heating the back of the tape. Be careful not to overheat it, which will deform the tape. Slowly tear off with your hands, be careful throughout the process. The patterned tape will leave a trace more or less. Be careful not to overheat it, otherwise, more will remain. A little trick: the faster you uncover, the less the residue, but the easier it is to tear the carton. The specific effect may be related to many aspects, but as long as you are proficient, it is still satisfactory in most cases, and it is not easy to find out when you seal it again without checking it carefully.
3. Fragile labels often found on things such as computer accessories or mobile phones.
You can directly use a blade to scrape off slowly. In some cases, a thinner blade may be required. In this case, a razor blade can be used. If the label is large, use a hair dryer to assist heating.
4. After uncovering, there will be a variety of anti-counterfeiting labels left by some characters composed of glue.
You can gently pick the corners with a blade, heat it with a hair dryer, and slowly pick up the entire label. When handling this kind of label, you must be careful and then careful. If you are not careful, there will be residual traces and you will be unsuccessful.
5. Self-adhesive tape or sticker stuck on a thin plastic film.
General heating is definitely not good, because the plastic film will also be blown and deformed. The method is very simple: tear it off with your hands directly, not slowly, but fast. For example, if the label is large, you can divide it several times, suddenly and quickly. To deal with this situation, the lower the ambient temperature, the better.
