(1) Adhesive tape should be stored in a warehouse to avoid sunlight and rain; it is forbidden to contact with acid-base oil and organic solvents, keep it clean and dry, 1m away from the discovery device, and the room temperature is between -15°C and 40°C.
(2) Adhesive tape should be placed in rolls, not folded, and should be turned over once a season when it is stored for too long.
(3) When loading and unloading the conveyor belt, it is best to use a crane, and use a rigging with a beam to hoist it smoothly to avoid damaging the belt edges, and do not load and unload arbitrarily, which may cause loose rolls.
(4) The type and specifications of the tape should be selected reasonably according to the use needs and specific conditions.
(5) Adhesive tapes of different varieties, different specifications and models, strength, and number of cloth layers shall not be connected (grouped) together for use.
(6) It is better to use thermal vulcanization bonding for conveyor belt joints to improve reliability and maintain high effective strength.
(7) The diameter of the conveying roller of the conveyor and the minimum pulley diameter of the conveyor belt should meet the relevant regulations.
(8) Do not make the tape snake or creep, keep the drag roller, the vertical roller flexible, and the tension should be moderate.
(9) When the conveyor is equipped with baffles and cleaning devices, the abrasion of the tape should be avoided.
(10) Cleanliness is the basic condition for the good operation of the tape. Foreign matter will affect the eccentricity of the tape, the difference in tension, and even breakage.
(11) When the tape is found to have early damage during use, the cause should be found and repaired in time to avoid adverse consequences.
