Translucent Double Sided Tissue Tape

Looking for a reliable tape that holds tight without adding bulk? This translucent double sided tissue tape is built with a lightweight tissue paper core coated on both sides with strong glue. The thin tissue layer gives the tape good shape stability so it won't stretch or warp when applied. It sticks fast to smooth or rough surfaces, helping you join materials neatly without showing thick seams. Whether you are running a fast manual assembly line or using automated machines, this tissue double tape tears easily by hand and peels off the protective paper liner smoothly.

• Grabs onto surfaces quickly so parts stay in place right after pressing.
• Strong tissue core stops the tape from ripping or fuzzy edges during die-cutting.
• Soft and flexible backing bends around curved corners without popping up later.
• Tough acrylic glue stays sticky even in damp rooms or hot working areas.
• Great holding power stops heavy parts from sliding down over time.
• Tears easily across by hand so workers don't need scissors on the line.

For buyers comparing translucent double sided tissue tape grades, the main selection factors are adhesive chemistry, total thickness, temperature requirement, and the surface characteristics of the materials being joined.

Request a Free Sample

• Automotive Interior Components: Suitable for attaching leather coverings, trim materials, foam layers, and decorative interior components where a thin adhesive layer is preferred.
• Appliance Components: The tissue double tape construction can be used for fixing nameplates, decorative films, plastic parts, and lightweight panels without adding noticeable thickness around the bonded area.
• Printing & Converting: Used for joining paper, film, and foil webs where a thin double coated construction is needed for roll-to-roll processing.
• Furniture & Decorative Materials: Suitable for laminating veneers, plastic edging, decorative sheets, and selected foam materials.
• Foam & Rubber Components: The flexible carrier can be used for bonding seals, cushioning materials, and rubber parts when the assembly requires a narrow adhesive profile.

In production environments, double coated tissue tape can be selected according to the combination of substrate, adhesive type, thickness, and expected service temperature rather than using one universal grade.

Q1: How does tape thickness affect the finished assembly?

A thinner construction helps keep the adhesive layer from becoming a noticeable part of the assembled component. For compact laminations and parts with limited clearance, grades from 0.06–0.10 mm can be considered. Thicker grades within the 0.10–0.16 mm range provide a little more material between the two bonded surfaces.

Q2: What should be checked before applying the tape to a substrate?

The bonding surface should be dry, clean, and free from dust, release agents, oil, or other contamination. Surface texture also matters because highly textured materials may require a more conformable adhesive construction. Applying sufficient pressure after placement helps the adhesive establish contact with the substrate.

Q3: Which specification is more suitable for a long roll-to-roll production process?

For continuous converting, the appropriate grade depends on the equipment, web material, operating temperature, and required unwind behavior. Widths from 2–1240 mm and roll lengths up to 1200 m are available, allowing the material to be matched to different production formats.

Q4: Why is translucent construction useful in laminated assemblies?

A translucent tape reduces the visual contrast of the adhesive layer when two light-colored or decorative materials are joined. This can be useful for labels, films, veneers, trim materials, and other assemblies where an exposed tape edge would be visually undesirable.

Q5: How can buyers choose between the four NKS-DT grades?

The main selection points are adhesive chemistry and service temperature. NKS-DT uses acrylic adhesive and covers 80°C–160°C, while NKS-DTS uses solvent-based acrylic with 80°C resistance. NKS-DTH uses hot melt adhesive and NKS-DTW uses water-based adhesive, with both rated at 60°C. Final selection should be based on the actual substrate and working conditions.

Contact now