Clean Room Sticky Mat

Product Description

Clean room sticky mat are made of medium tack no bubble PE adhesive films, several pieces of PE adhesive films laminated together. The sticky mats are designed to remove the dust or unclean things from shoes or transport cars. It is the most convenient way to keep the floors and clean rooms free of dust and bacteria. 

Features

1. Nice adhesion, can remove 99% of the dust

2. Water soluble adhesive contains no metal, chemicals and no unpleasant smell

3. Glossy and no bubble surface, no wrinkles

4. The mats would not become unglued in the dust sticky process

Construction

PE Film
Adhesive

Physical Properties

Note: The above technical information and data should be considered representative or typical only and should not be used for specification purposes.

Application

Clean room sticky mat To remove the dustiness of shoes or cars before they enter into the clean room/workshop. Are usually placed at indoor entrances: buildings, laboratories, hospitals, and other dust-free places. The tacky mats can effectively capture and capture the dust passing by objects to prevent pollution caused by the outdoor environment. The adhesive function of the sticky tack mats can help control indoor cleaning and keep the environment clean.

Application Guideline

1.) Substrate surfaces should be clean and dry prior to tape application. Isopropyl alcohol (isopropanol) applied with a lint-free wipe or swab should be adequate for removing surface contamination such as dust or fingerprints. Do not use "denatured alcohol" or glass cleaners which often contain oily components. Allow the surface to dry for several minutes before applying the tape. More aggressive solvents (such as acetone, methyl ethyl ketone (MEK), or toluene) may be required to remove heavier contamination (grease, machine oils, solder flux, etc.) but should be followed by a final isopropanol wipe as described above.

Note: Be sure to read and follow the manufacturers' precautions and directions when using primers and solvents.

2.) Apply the tape to one substrate at a modest angle with the use of a squeegee, rubber roller, or finger pressure to help reduce the potential for air entrapment under the tape during its application. The liner can be removed after positioning the tape onto the first substrate.

3.) Assemble the part by applying compression to the substrates to ensure good wetting of the substrate surfaces with the tape. Proper application of pressure (amount of pressure, time applied, temperature applied) will depend upon the design of the parts. Rigid substrates are more difficult to bond without air entrapment as most rigid parts are not flat. The use of a thicker tape may result in increased wetting of rigid substrates. Flexible substrates can be bonded to rigid or flexible parts with much less concern about air entrapment because one of the flexible substrates can conform to the other substrates.

Shelf Life

Product shelf life is 2 years from the date of manufacture when stored at room temperature conditions (72°F [22°C] and 50% RH) in the product's original packaging.

Available Sizes

Width: Can be Customized

Length: Can be customized

Custom Sizes: If you need customized sizes or die-cut parts please feel free to contact the NKS sales representative.

Company Profile

Payment & Shipment

Thanks for your time in viewing our tapes. If you find our tapes interested, please fill the below blank space with your detailed requirements. NAIKOS's sales team would be happy to serve you within 12 hours.

Return to Homepage

Hot Tags: clean room sticky mat, suppliers, manufacturers, factory, customized, wholesale, Sticky Mat, PE Film Adhesive Sticky Mat, Clean Room Tacky Mat Sticky Mat, 30 Layers Disposable Blue Sticky Mat